The following is included:
Load carrying features
Your choice of shoulder straps – either S-shaped or J-shaped. These have a daisy chain and pockets can be added. Wide J-shaped with sewn-in pockets are available at an upcharge.
Hip belt with 15mm of padding and a load-stiffening insert. The dual adjust forward pull closure means you can fine-tune the angle of tension.
The frame consists of 2 tubular aluminum stays in a slight V-taper. The bottom is reinforced and firmly connected to the hip belt while load lifters are attached at the top. It’s very light for its stiffness compared to common flat bar frames. Frame length: short 52cm, medium 56cm, long 60cm & longer 64cm.
Integrated foam sit pad that doubles as upper back padding. The back pocket can take other pads up to 2cm in thickness.
The comfortable carrying range is up to 17kg.
Materials & pockets
Pack body made from EPLX200 with EPLX400 used for the back and bottom panels.
Ultra stretch front pocket.
Shaped side pockets that are accessible while wearing the pack. They can fit 2x 1L bottles each.
Straps
Y-shaped top strap
The roll top has both snaps and buckles
Side strap compression for the roll top
Single elastic side compression
Measurements
The internal volume is the maximum usable capacity in the main compartment with 3 rolls on the rolltop – short 40L, medium 42L, long 44L & longer 46L. Pockets add up to 8L external capacity.
Unrolled length: short 85cm, medium 89cm, long 93cm & longer 97cm
Circumference: bottom 81cm & top 90cm
Notes
The pack is constructed from waterproof laminates and sewn with binding tape. A pack liner is always recommended for full waterproofing.